The T1013 Cycle Timer a Solid State timer, that has been designed for use with aeroponic and hydroponic systems. This CSA / UL approved unit is rated for inductive loads up to 1/2 HP or 10AMP.

12V DC Power Supply

Designed to allow versatile control of CO2 gas injection (bottled or burner) into the growing area. Three separate timers set the Fan and CO2 on times, and the Absorption time delay for up to 60 mins, with a extra add on, a thermostat controller.

The T1011 Cycle Timer is an enhanced function cycle timer which allows the user to repetitively turn on and off a 24 VAC output to control any load device rated at up to 0.8 Amps 20 watt at 24 VAC.

The D1008 Solid State Driver performs the same functions as the D1005, however it is only rated for 1/2 HP or 10 A (resistive or inductive). CSA & UL approved.

Pd2080-c1006 CO2 Board, Pipe Dream Electronics - Pipe Dream System

The ST1004 Sequence Controller is a programmable timer that allows the user to turn on up to six 24Volt AC loads one after another for any where between 5 secs and 10 mins.

D1015 1 Hp Driver, Pipe Dream Electronics - Pipe Dream System

PD 160 - 200 Top Support - Pipe Dream System

Pd 200 Large Component Bag - Pipe Dream System

Pd 200 Res Kit - Pipe Dream System

Pd 200 Small Component Bag - Pipe Dream System